NsPro card not found or corrupted (ERROR 0x01)
Disconnect nspro from your pc
download and run the attached file on your PC/laptop, it will open the device manager. CLICK HERE to Download
Go to "View" and select "Show hidden devices"
Then go to USB Devices and uninstall all NsPro Box and NsPro Converter devices installed there. Also remove all NsPro Port devices from Com port section.
Then reconnect nspro to PC and reinstall nspro drivers.
Make sure after re-installation, you must see these drivers in your device manager, by using the "uninstall NsPro hiden drivers"
Driver Software Installation by Windows after all NsPro drivers has being re-installed.
As you can see above, Generic Smart Cards and e-gate Smart Card are both installed, therefore NsPro will work. Make sure you confirm this by going to Control Panel -> Hardware and Sound -> Devices and Printers to check if all drivers are well installed, according to image of STEP 3 & 4 below.
If all is well install, then NsPro box will work for you. For any HELP, you may contact us through our : CONTACT FORM
For any comment you may use OUR GUEST BOOK
Nspro work with generic smart card drivers from windows 7
Uninstall NsPro, delete NsPro folder from Program Files then install latest nspro version.
Connect the box to PC and let windows download the smartcard drivers from microsoft servers. Then start nspro software.
If windows cant find the drivers on the internet, you can use the Jcop USb driver from NsPro driver folder on your PC.
Run this program as an administrator:
Right click on NsPro Box shortcut on your desktop and select properties.
Scroll to or Select Compatibility Tab. check or tick the Privilege level box.
And select apply, then OK?.
NsPro Windows 7 Full installation 1-15